Alesis 24 Specifications download pdf (Page 89)

Description of Controls

8 8 STUDIO 24 REFERENCE MANUAL

TOP PANEL INPUTS AND OUTPUTS

MAIN OUTS

Connect these jacks to your primary destination: the PA system’s inputs, or the 2-

track mixdown recorder. Signal comes here from the L/R MASTER FADER, and

passes through the Main Inserts. This output is a true, 3-wire balanced differential

output with a maximum output level of +28 dBu.

The MAIN OUTS are also duplicated on the back panel but are unbalanced RCA

jacks at a level of -10 dBV instead of balanced 1/4” connectors. They receive the same

signal as the top panel jacks, including any signal introduced by the MAIN INSERTS.

Both sets of jacks may be used simultaneously.

MAIN INSERTS

If you want to compress or equalize the stereo mix before it hits the L/R fader,

connect your processing device to these jacks using a 1/4” TRS 3-conductor “splitter”

cable (“tip” connector to the input of the device, and “ring” to the return), same as

for the channel insert jacks. See page 49.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 104 105

No comments

Alesis 24 Specifications Page 89