Alesis 24 Specifications download pdf (Page 30)

Guided Tour

STUDIO 24 REFERENCE MANUAL 2 9

AUX SEND/RETURN SYSTEM

AUX SENDS

In the center of each channel module are the blue knobs that make up the Auxiliary

Send section, which allows the signal to be routed to outboard signal processing

equipment. There are two Aux knobs in each channel labeled “3” and “4” that set the

level of signal sent out of the AUX SENDS jacks on the top panel.. Since some people

will use the Monitor section as an auxiliary send, they’re numbered “1” and “2”.

STEREO AUX RETURNS

The Stereo Aux Returns, found near the upper right section of the top panel, are extra

input channels designed for routing the signals back from signal processing

equipment. Aux Returns can be thought of as very basic line input channels. The

gray LEVEL knobs control how much effect will be added to the mix, either while

tracking or mixing down. The purple MON 1/2 knobs control how much effect will

be sent to the monitor section so you can hear it in the control room and headphone

mix, independently of the amount going to the multitrack or stereo mix.

If you are using a MIDI system with several keyboards, each with stereo signals, you

can alternatively use the Stereo Aux Returns as additional line inputs. This is

especially useful for keyboards that provide their own on-board signal processing,

and therefore do not need to be routed to the other Aux Sends.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 104 105

No comments

Alesis 24 Specifications Page 30