Alesis 24 Specifications download pdf (Page 65)

Recording

6 4 STUDIO 24 REFERENCE MANUAL

To bounce multiple tracks to two tracks (stereo):

1 For each Channel (tape track) you wish to bounce, press the CHAN/MON

REVERSE button so it is down.

This sends the tape tracks to the Channel FADERS.

Make sure that CHAN/MON REVERSE is UP on the Channels you’re

bouncing to (Channels 5 and 6 in this example). Otherwise, feedback

may occur.

2 Assign the Channels to Groups 1 and 2 by pressing the GRP buttons next to the

channel faders.

3 Raise the GRP 1 and 2 FADERS to the maximum position.

4 Place tracks 5 and 6 into record-ready, and select either GRP 1/2 or MON 1/2 as

the Control Room source. If you’re using MON 1/2, turn the monitor pan (the

upper black knob, not the one close to the MUTE key) for track 5 hard left, and

the monitor pan for track 6 hard right.

5 Set the DIRECT OUT SOURCE switch of Channels 5 and 6 to its GRP (down)

position.

6 Adjust each Channel’s PAN knob and FADER to achieve a desirable mix.

7 Rewind the tape, and record onto tracks 5 and 6 those portions you wish to

bounce.

8 Tracks 1-4 are now available for recording new parts.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 104 105

No comments

Alesis 24 Specifications Page 65