Alesis 24 Specifications download pdf (Page 57)

Recording

5 6 STUDIO 24 REFERENCE MANUAL

machine tracks you wish to record on into the record-ready or “input” mode,

and raise the MON 1/2 LEVEL control knobs of the Channels the tracks’ outputs

are connected to. Set the CONTROL ROOM SOURCE switch to MON 1/2 (all

other CONTROL ROOM switches must be up). Set the Monitor PAN controls to

hard left and right to hear the proper stereo image in the control room.

If you don’t perform this last step, the main PAN settings you make on the

channels you’re recording in step 3 will be incorrect in the final stereo image.

Be sure the L/R buttons are in the “Off” position (up) for the

Channels being recorded. Otherwise, this may cause the monitoring

to be false if the signals can be heard from two sources: the

Channels and the Tape Monitors.

✪

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 104 105

No comments

Alesis 24 Specifications Page 57