Alesis 24 Specifications download pdf (Page 29)

Guided Tour

2 8 STUDIO 24 REFERENCE MANUAL

MONITOR 1/2 SECTION

In multitrack recording, once signal goes from the Group Outputs to the recorder, it

comes back to the tape inputs. The TAPE IN jack has no trim control of its own; it is

designed to handle the unbalanced line levels that most multitrack recorders

generate.

Each Channel 1 - 8 features an in-line monitor which uses either the tape return or

the mic/line input as the source for the MONITOR 1/2 mix (the stereo channnels are

always routed to MON 1/2). To listen to tape tracks in the Monitor, make sure the

CHAN/MON REVERSE switch in the up position. (To listen to the mic or

instrument connected to a Channel via the Monitor, make sure the CHAN/MON

REVERSE switch is in the down position.)

The MONITOR 1/2 mix has its own MASTER LEVEL control and may be heard in

several different ways:

• From its own output jacks on the Studio 24’s back panel connected to an

external headphone amplifier

• the HEADPHONE jack of the Studio 24 with the MON 1/2 switch down in

the CONTROL ROOM section

• in the Control Room mix, with the MON 1/2 switch down

• in the L/R mix, if the LINK TO L/R switch is down

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 104 105

No comments

Alesis 24 Specifications Page 29