Alesis DM5Pro Kit Specifications Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 175
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 70
Programming Effects
DM PRO REFERENCE MANUAL 7 1
THE PITCH EFFECTS FUNCTION
This Function is a configurable effect that can be set to one of three Pitch Effect
Types:
Chorus, Flanger or Resonator.
The output of the Chorus and Flanger can also be set to stereo or mono. In the case of
stereo settings, the modulation effect sweeps across the stereo image, whereas with
mono settings, the modulation effect remains panned in the center.
The current Pitch Type will always appear on the top line of the display within the
Pitch Effects Function. The Pitch Type is always set on Page 3 of the Pitch Effects
Function, regardless of the Pitch Type selected.
The first three Parameters of the Pitch Function are always the same, regardless of
the Pitch Type selected:
P1 The Pitch Effect OUTPUT LEVEL Parameter
As with all of the Effects Output Levels, this Parameter sets the final output volume
of the Pitch Effect.
To set the Pitch Effect Output Level, move the cursor beneath the Value and then
turn the Value encoder to adjust the volume of the Effect:
STEREO FLANGER
P1
Outpt Level: 90
P2 The Pitch Effect INPUT MIX
The Pitch Effect can be fed by two inputs: the output of the Delay Effect (
DEL) or a
direct line from the
OD>DL>PCH Buss (SND). The Pitch Effect Input Mix Parameter sets
the balance between the two inputs.
The display shows the two input paths (
SND and DEL) with a number between them.
If the Value is set to anything other than 00, an arrow will point to which signal is
being favored:
STEREO FLANGER
P2
Inpt:DEL75>SND
In the above example, the Pitch Input Mix is set to favor the OD>DL>PCH Buss (SND)
over the Delay Effect output signal (DEL) by 75%.
For a perfect balance between the two signals, set the Pitch Effect Input Mix Value to
00. For the maximum Delay Input, set the Pitch Effect Input Mix Value to
DEL<99SND.
For no Delay input at all, set the Pitch Effect Input Mix Value to DEL99>SND.
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 174 175

Comments to this Manuals

No comments