Alesis DM5Pro Kit Specifications download pdf (Page 18)

Welcome to the DM Pro

1 8 DM PRO REFERENCE MANUAL

A UDIO CONNECTIONS

1234

STEREO

AUX OUT

SOLO

AUX OUTS

When connecting audio cables and/or turning the power on and off,

make sure that the volume controls in your system are turned down.

The rear panel of the DM Pro has two Main and four Auxiliary audio outputs along

with two RCA inputs. There is also a headphone output on the front panel. The

outputs can provide an amplification system or mixer with several different audio

connection options:

MONO Connect a mono patch cord from either the [MAIN

OUT-L] or the [MAIN OUT-R] to a mono amplification

system or individual mixer input.

STEREO Connect two mono patch cords from the [MAIN OUT -

L] and [MAIN OUT -R] to a stereo amplification system

or two mixer inputs. Make sure that your mixer inputs

are panned hard left and right in order to realize the

stereo effect.

SIX INDIVIDUAL Connect two mono patch cords from the [MAIN OUT -

OUTS L] and [MAIN OUT -R] and four mono patch cords from

the [STEREO AUX OUTS 1/2], [SOLO AUX OUT 3] and

[SOLO AUX OUT 4] to six mixer inputs. Note that the

DM Pro Effects Processor only plays out of the MAIN

OUTPUTs.

STEREO Plug a set of high quality stereo headphones into the

HEADPHONES front panel [PHONES] jack.

RCA AUX These jacks will let you run the stereo audio output of a

INPUTS CD or cassette player through the DM Pro’s main or

headphone outputs. Use it for mixing audio tracks in

with your performance, or for practicing along with

your favorite music! Control the volume of the music

from the CD/cassette player.

Tip: For the Main and Auxiliary Output jacks, either balanced or unbalanced 1/4”

cables may be used.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 174 175

No comments

Alesis DM5Pro Kit Specifications Page 18