Alesis 03D User Manual download pdf (Page 134)

124 Chapter 13—Onboard Effects

03D—Owner’s Manual

Effects Returns Dynamics Processors

Each effects return features a stereo dynamics processor. See Dynamics Processors on

page 143 for more information.

Muting Effects Returns

Effects returns can be muted using the EFFECT RETURN [ON] button. This

button contains an indicator that lights up when an effect return is on.

1. Use the EFFECT RETURN [SEL] button to select either EFFECT RETURN 1

or EFFECT RETURN 2.

The two LED indicators above the [SEL] button indicate which effect return is selected.

2. Press the [ON] button.

The selected effect return is muted. Press the [ON] button again to unmute the effect

return.

The EFFECT RETURN [ON] button is not affected by the Mixing Layer setting.

When the [SOLO] function is on, the EFFECT RETURN [ON] buttons work as a solo

button, not a mute button.

Setting Effects Returns Levels

The effects return level is controlled using the EFFECT RETURN fader.

1.Use the EFFECT RETURN [SEL] button to select either EFFECT

RETURN 1 or EFFECT RETURN 2.

The two LED indicators above the [SEL] button indicate which effect return

is selected.

2.Use the EFFECT RETURN fader adjust the level of the selected

return.

Pan, Balance & Routing

The stereo effects return signals can be routed to buses 1 to 4 and the Stereo bus. They

can be balanced and panned. Pan can be used to adjust the width of the stereo effects

return signals. Pan, balance, and routing settings are made on the Pan/Route page. See

Stereo Pan, Balance & Routing on page 59 for more information.

Aux sends

The effects return signals can be sent to aux sends 1 to 4. Effects return signals cannot

sent to the Effects buses, as this would create a loop. See Aux Sends on page 89 for more

information.

EFFECT

RETURN

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 301 302

No comments

Alesis 03D User Manual Page 134