Alesis ADAT-XT20 User Manual Page 22
- Page / 140
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Your First Session With The ADAT XT20: Chapter 2
ADAT XT20 Reference Manual 21
TRANSPORT BUTTONS
During recording and playback, the following transport buttons are used
frequently. Get familiar with them by using them while watching the
TIME counter.
REWIND High speed reverse. Press with [PLAY] to initiate review mode.
FAST FWD High speed forward. Press with [PLAY] to initiate cue mode.
STOP
Stops transport and disables recording.
While the transport is stopped, this button toggles between
threaded (LED is lit) and unthreaded modes (LED is flashing).
PLAY
Starts playback. Initiates recording when pressed with
[RECORD].
Stops recording when in record mode while continuing to play.
Press with [FAST FWD] to initiate Cue mode.
Press with [REWIND] to initiate Review mode.
RECORD Press with [PLAY] to initiate recording.
RECORDING
Recording takes place only on tracks that are in record-ready. When
you start recording, the [RECORD] LED lights, and the [REC] LEDs for
those tracks in record-ready will stop flashing and remain lit. If no
tracks are in record-ready when recording takes place, the [RECORD]
LED will flash to indicate that pressing any of the RECORD ENABLE
buttons will initiate recording on the selected track.
To make a recording:
❿ Use the [REWIND] or [FAST FWD] button to locate to the
desired tape position
Either the [REWIND] or [FAST FWD] LED will light (depending on
which button was pressed), indicating that the transport is moving in
that direction. The TIME counter will indicate the current tape location
status while the transport is in motion.
❡ When you’ve arrived at the desired tape address, press the
[STOP] button.
The [STOP] LED lights.
① Hold [PLAY], and then press [RECORD].
Both the [PLAY] and [RECORD] LEDs will light to indicate you are
recording.
➃ To go in and out of record on the individual tracks while record
mode is engaged, press any of the RECORD ENABLE buttons [1] – [8].
Record-enabled tracks will have their REC LED lit. If no tracks are
record-enabled during recording, the [RECORD] LED will flash.
➄ To punch out without stopping, press [PLAY].
The [RECORD] LED turns off, while the [PLAY] LED remains lit.
➅ To punch out and stop the transport, press [STOP]
The [RECORD] and [PLAY] LEDs turn off; the [STOP] LED lights.
- INTRODUCTION 2
- HOW TO USE THIS MANUAL 2
- Introduction/Contents 3
- 2 ADAT XT20 Reference Manual 3
- CONTENTS 4
- APPLICATIONS 91 6
- TROUBLESHOOTING 99 6
- ERROR CODES 105 7
- SPECIFICATIONS 110 7
- GLOSSARY 112 7
- INDEX 119 7
- SETTING UP 8
- AVOIDING GROUND LOOPS 9
- ABOUT AUDIO CABLES 11
- BASIC AUDIO HOOKUP 12
- “THREADED” VS. “UNTHREADED” 13
- OPERATING ENVIRONMENT 14
- Chapter 1: Setting Up 15
- 14 ADAT XT20 Reference Manual 15
- YOUR FIRST SESSION 16
- WITH THE ADAT 16
- -- -- -- 17
- FORMATTING A TAPE – A MUST! 18
- RECORDING WHILE FORMATTING 19
- 0H 15M 48S 21 20
- 0H 01M 29S 03 20
- 20 ADAT XT20 Reference Manual 21
- TRANSPORT BUTTONS 22
- RECORDING 22
- PLAYBACK 23
- REVIEWING AND CUEING 23
- ADAT XT20 Reference Manual 23 24
- LED will turn on 24
- LOCATING 25
- AUTOMATED RECORDING 28
- PITCH CONTROL 30
- TRACK DELAY 30
- 30 ADAT XT20 Reference Manual 31
- TRACK COPY 32
- DISPLAY BRIGHTNESS 32
- 32 ADAT XT20 Reference Manual 33
- Chapter 3: Connections 35
- 34 ADAT XT20 Reference Manual 35
- Larger Key Notch 36
- 36 ADAT XT20 Reference Manual 37
- In 8 p l k Out 8 A E F 37
- ANALOG INPUT SELECT MODE 38
- SYNC IN/OUT 39
- Ovt 16dt 40
- 40 ADAT XT20 Reference Manual 41
- FOOTSWITCHES 43
- THE XT20 REMOTE 43
- BASIC OPERATIONS 44
- COMPLETE FORMAT 45
- FORMAT EXTEND 46
- Pr 0t 0 FF 47
- Pr 0t 0 n 48
- READING THE DISPLAY 49
- DISPLAY ICONS 50
- Chapter 4: Basic Operations 53
- 52 ADAT XT20 Reference Manual 53
- BASIC EDITING 56
- EDITING INDIVIDUAL DIGITS 57
- INPUT SELECT 58
- DIGITAL INPUT 59
- TRACK COPY 59
- INPUT MONITOR 61
- Stop,Pause 62
- Rew.,F.Fwd 62
- PEAK MODE BUTTON 63
- PEAK CLEAR BUTTON 63
- FINE METER MODE 63
- Basic Operations: Chapter 4 64
- ADAT XT20 Reference Manual 63 64
- RECORDING A “BENCHMARK” TAPE 65
- RECORD ENABLE 66
- SETTING LEVELS 66
- TRANSPORT CONTROLS 68
- RECORD/PUNCH IN OR OUT 70
- SAMPLE RATE (CLOCK) 71
- FA dE 2@ 1 72
- 74 ADAT XT20 Reference Manual 75
- ➃ through ➆ 77
- AUTOLOCATION CONTROLS 78
- SETTING LOCATE POINTS 80
- AUTO LOOPING 81
- AUTO RECORD 82
- TAPE LENGTH 84
- FOOTSWITCH CONTROLS 86
- USING THE XT20 LRC REMOTE 87
- ADAT XT20 Reference Manual 87 88
- MULTIPLE ADAT 89
- SYNCHRONIZING MACHINES 90
- FORMATTING MULTIPLE TAPES 91
- MASTER FORMAT DISABLED 93
- RECORDING DIGITAL AUDIO 94
- MAKING DIGITAL BACKUPS 96
- IGITAL CLOCK CONSIDERATIONS 99
- 0H 00M 00S 00 100
- COMBINING XT20S AND ADATS 101
- POLARITY DIFFERENCES 103
- CONNECTIONS 104
- APPLICATIONS 106
- LIVE/LONG-TERM RECORDING 107
- COMPUTER CONTROL 108
- LIBRARIES AND ARCHIVES 109
- MODULAR RECORDING 109
- DIGITAL RECORDING 113
- CONCEPTS 113
- WHY S-VHS? 114
- TROUBLESHOOTING 116
- CHECKING SOFTWARE VERSION 117
- ERROR RATE DISPLAY 117
- ADAT HEAD LIFE 117
- ADAT HEAD MAINTENANCE 118
- DRUM TIME DISPLAY 119
- TAPE MAINTENANCE: SAFE TAPE 119
- MAINTENANCE/SERVICE 120
- ERROR CODES 122
- Appendix C: Error Codes 126
- SPECIFICATIONS 127
- Digital Inputs/Outputs 128
- GLOSSARY 129
- IBER OPTICAL CONNECTOR 131
- OUSE SYNC 131
- UNBALANCED AUDIO SIGNALS 133
- Glossary 134
- SET LOCATE button, 56, 57 138
- QuadraSynth User’s Manual 140
Related products and manuals for Recording Equipment Alesis ADAT-XT20
(24 pages)
Recording Equipment Alesis AI-1 User Manual
(10 pages)
(10 pages)
Recording Equipment Alesis ADAT Owner's Manual
(354 pages)
(354 pages)
© 2020, manymanuals.com. All rights reserved. | 2.554 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals