Alesis iMultiMix 16 USB Specifications download pdf (Page 23)

A Tour of the IMultiMix16 USB

7) iPod PLAYBACK Fader

This fader controls the audio playback level of your iPod through

the mixer.

8) iPod TO MIX

This button sends the signal from your iPod to the MAIN MIX,

which is sent to the MAIN MIX OUT jacks.

9) iPod TO CTRL ROOM

This button sends the signal from your iPod to the control room

mix, which is sent to the CTRL RM OUT jacks.

10) iPod INPUT MON TO CTRL ROOM

This button sends the signal being sent to your iPod to the control

room mix, which is sent to the CTRL RM OUT jacks. This allows

you to hear the exact signal which will be recorded to your iPod.

This signal is post-Limiter, so you can listen to the effect that the

Limiter is having on the recording.

When you press this button down, be sure the other CONTROL

ROOM routing buttons (MIX, ALT 3/4, and /2 TK) are all

raised (not engaged). If both any of these are down at the same

time as this one, you will not hear a true representation of what is

being recorded to the iPod.

While it’s connected to the

iMultiMix, your iPod will

charge automatically except

when it is recording. By

default, charging is disabled

during recording. This is

because charging while

recording may introduce low-

level noise into your

recordings.

If your battery is getting low

while recording, or if you

plan to record very long

sessions, press and hold |<<

and >>| for about one second

while recording to toggle

charging on. Press and hold

|<< and >>| again to disable

charging at any time while

recording.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Alesis iMultiMix 16 USB Specifications Page 23