Alesis iMultiMix 16 USB Specifications download pdf (Page 24)

A Tour of the iMultiMix16 USB

1 2 3

Rear of the Mixer

Here’s what you’ll find at the rear of the mixer.

1) Power Input

Here’s where you plug in your mixer’s external power supply. You

should always connect your power supply to the mixer before you

plug the power supply into an electrical outlet.

Power Supply Unit:

This unit provides 18VAC at 1200mA x2 of power. As

with nearly all power supply units, this one tends to get

warm when left on for a while. This is perfectly normal.

2) POWER ON

Another easy one. Switch this one on and your mixer has power.

Switch it off and it doesn’t. Make sure the faders in the master

section are pulled all the way down when powering your mixer up

or down.

3) PHANTOM ON

This switch activates and deactivates the phantom power

described in “Mic Inputs (Channels 1 – 8),” page 13. This

switch controls phantom power for all four mic inputs.

4) USB Port

This port allows you to connect the iMultiMix USB to a computer

for 2-way, stereo digital audio communication.

The POWER INPUT is built

to accept only the power

supply unit provided with

your iMultiMix USB, or an

AC power supply that has the

same specs. Others probably

will not work.

s we said earlier, it’s very

important that you plug in

your microphones and mute

your system before you turn

on phantom power.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

No comments

Alesis iMultiMix 16 USB Specifications Page 24