Alesis QS7.1 Service Manual Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 97
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
Alesis QS Series Keyboards Service Manual V1.00 39 11/19/06
7.00 Appendix B Software Histories
7.10 QS6
V1.00 September 11th, 1995 Checksum: BB68H
1. First Production Release version 1.00!
V1.10 October 25th, 1995 Checksum: D3A4H
1. Changed program changing so that the DAC is muted on program changes which use the distortion algorithm, program changes with
different configurations, and program changes with the same algorithm but with different reverb types.
2. Changed version number and date for official 1.10 release.
#########################################################################
V E R S I O N 2 . 0 0
#########################################################################
V2.00 Sep. 30, 1996 Checksum: F010h
1. Fixed FX config 5 bug in which if the leslie input was reverb, a potentially random RAM value would be cleared.
2. Fixed MIDI Bank Select bug where S6 card banks could not be called up through MIDI.
3. Changed Controller A Default Number to 12. Changed Controller B Default Number to 13.
4. Controller 11 (MIDI Expression) is now implemented as another volume scaler like Controller 7 (MIDI Volume). This affected
VOICE.SRC, DATA3, MIDISUBS.SRC and PAGESUBS.SRC. Fixed bug where Controller A value was not being sent out the Computer
Interface port correctly. It was, however, going out the regular MIDI OUT port correctly. This fix changed the file CONVS.SRC at the very
end in the routine CTL_MIDI. Fixed bug (also in S8, S9) that kept drum sounds that were gated from being cut off when another note in
the same mute group was played.
5. Added Card Sequencer from QS7/8. Only sequence numbers 00-49 are allowed.
6. Added QS7/8 -> QS6 Sample remapping.
7. Fixed various display anomalies in the FX configuration editing: a) FX Config #1: colon after Send 3 CHORUS DEPTH. b) FX Configs
#1,3,4: changed Send 1 DEL_IN to DEL-IN. c) FX Config #5: Send 1: changed LEZLIE pg 3 from LEZ_IN to LEZ-IN.
8. Added Audio Test (like QS7/8) as the new last test in the Self Tests.
9. Added direct access to the Self-Tests as done in the QS7/8. In addition to selecting the tests using the VALUE UP and VALUE DOWN
buttons, the tests can also be directly selected using the program select buttons 0-8.
10. Added new checksum for Sound ROM 0 in the SROM test. The SROM test will now pass with either the new or old SROM 0. If one of
the SROM checksums does not pass, pressing the VALUE UP button will advance to test the next SROM instead of aborting the test.
11. Changed NORMAL Keyboard mode so that in MIX mode, PROGRAM ENABLE (per Mix Channel) now overrides MIDI OUT ENABLE
(per Mix Channel).
12. Fixed bug where COMPARE and GLOBAL would interact to defile the edit buffer.
13. Fixed Mix UnCompare bug where when going out of compare in Mix mode all voices playing should be stopped, but they weren't.
14. Fixed Mix MIDI Dots bug where when leaving Edit mode by hitting the <MIX> button, no new MIDI Dots would light when a new key was
pressed until all keys were first released.
15. Changed Program and Mix Channel RANGE when using keyboard note presses to set the range so that the Global Keyboard Transpose
is taken into account.
16. Modified portamento routine so that each sound retains the last note played in that sound, and glides from the last note to the new note
played. Other sounds or channels will no longer cause portamento interaction.
17. Put HIMOM back in.
18. New Presets.
19. Fixed QS7/8 -> QS6 sample remapping lookup table for QS7/8 Ethnic group entries 11-16.
20. Fixed bug where COMPARE and GLOBAL interact to defile Mixes (but not programs in PROGRAM mode).
21. Added Baud Rate NACK sysex message (18h). The QS6 cannot change Baud Rates on its computer port like the QS7/8 can. Now, if
the QS6 receives a "Change Baud Rate" message, it responds with the new Baud Rate NACK message (#18h). Before, it was sending a
Baud Rate ACK message (#17h).
22. Fixed Card Sequence Overrun bug.
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 96 97

Comments to this Manuals

No comments