Alesis airFX Specifications download pdf (Page 24)

Performance: Chapter 3

24 AIRFX REFERENCE MANUAL

Effect Bypass

The effect Hold function can also be used as a Bypass. This function

turns off the Axyz controller so that the effect is not accidentally

triggered.

To use the Bypass function:

1. Recall a program as described in the previous section. There should

be no decimal points showing in the display.

Note that there are no decimal points in the display, showing that the

effect is loaded and operational.

2. Move your hand away from the Axyz controller, making sure that

the airFX isn’t affecting the sound.

3. Press and hold the Program knob for one second. A decimal point

should appear in the display between the first and second number

of the program.

1.2

A decimal point has appeared between the first and second digits of the

program number, showing that the Bypass/Hold function is set.

4. The Axyz controller should now have no effect, so moving your

hand towards the Axyz dome should not change the sound.

5. To turn off the hold function and resume normal operation, press

the Program knob one more time. The decimal point should go

away and you can use the Axyz controller again to modify the

sound.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

No comments

Alesis airFX Specifications Page 24