Alesis HR-16:B User Manual download pdf (Page 29)

hit. These curves will also effect MIDI Input triggering of the drums. In addition,

MIDI input velocity sensitivity allows 32 steps of volume control per drum when

used with external controllers such as drum pads or sequencers. Note, however,

that recording MIDI input information on the HR-16 will only store 8 steps of

velocity inside the HR-16's internal record memory.

SONG LOOP

The SONG LOOP function turns on or off song looping. The display is as follows:

14 SONG LOOP

ENABLE: OFF

_______

The +!- arrow buttons are used to turn this function on or off. The default is OFF.

When ON, a song that reaches its end will loop back to the beginning of that song.

TAPE

The TAPE button is used to access the tape interface features of the HR-16. This

allows the user to save and retrieve sequence data with an ordinary cassette

recorder. Pressing and holding the TAPE button results in the following display:

SAVE ALL PATTS &

SONGS TOTAPE

Pressing the RECORD button initiates the save to tape. Both buttons can now be

released, since this operation may take over two minutes, during which the

display will read:

SAVING TO TAPE..

PATT: 00

The display shows the current pattern or song being output. This display will

advance until all data Is output. Pressing the STOP button will abort the

operation. Before pressing RECORD, the

+!- arrow buttons can be used to access

the other five tape pages. They are as follows:

CHECK TAPE DATA

FOR ERRORS

_______

LOAD ALL PATTS &

SONGS FROM TAPE

LOAD ONE PATT

FROM TAPE: flO

Alesis HR-16 Instructions ............................................................................

.......................................................

Page 23

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

No comments

Alesis HR-16:B User Manual Page 29