Alesis MMT-8 User Manual download pdf (Page 9)

Mounting the encoder board

1) Place a small strip of double sided sticky tape somewhere convenient in the casing to mount the encoder

board. Stick the encoder board to it.

2) Now solder each pair of same coloured wires from the chip pins to the encoder board. Solder them in the

colour order as shown. The same colour wire from the chips should be on the same copper strip that the

coloured wires from the encoder are on.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Alesis MMT-8 User Manual Page 9