Alesis MMT-8 User Manual download pdf (Page 6)

Installing the chips

1) Solder a 5” length of red wire to the solder blob on the board as shown above. This is the power supply wire

to the chips.

2) Rest the new chip 1 on the right hand socket to check for alignment of the chip pins.

Pins 1, 2, 31 and 32 should overhang the socket.

This chip 1 is

the one that has

its pin 1 bent

out completely

horizontally

1

2

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments