Alesis QS7.1 Instruction Manual download pdf (Page 79)

Part 6: Editing Effects

QS7.1/QS8.1 Reference Manual 73

HOW “2 REVERBS” IS ARRANGED

As you can see by glancing at the diagram, this Configuration differs considerably

from the first! Here there are a single Delay, two Pitch effects, and two independent

Reverb effects, arranged as follows:

• Send 1 is routed through a mono Delay, then a stereo Pitch effect, and finally a

stereo Reverb effect.

• Send 2 has no effects of its own, but can be routed to the same Reverb effect as

send 1 (if you wish).

• Send 3 is routed through a mono Pitch effect and then its own stereo Reverb

effect.

• Send 4 has no effects of its own, but can be routed to the same Reverb effect as

send 3 (thus echoing the relationship that Send 2 has with Send 1).

• The Delay, Pitch and Reverb outputs of Send 1 can be routed to the Mix control

either singly or in any combination; while Send 2 is routed to the Mix only

through the Reverb.

• Send 3 and Send 4 can be routed to their own separate Mix, but only through the

second Reverb effect.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 187 188

No comments

Alesis QS7.1 Instruction Manual Page 79