Alesis > Products > Monitors > ProLinear 820 DSP > About
ProLinear 820 DSP Professional 120 Watt, 2 Way Active DSP Studio Monitors
ProLinear 820
DSP
Specifications
Input:
Nominal input level: +4dBu
(-15dBFS). Maximum input
level: +20dBu (7.0 Vrms)
Input impedance: 10kΩ
Output:
Sound Pressure Level
(SPL): ~113db at 1 meter
at max input below clipping.
Low Frequency (LF) power:
80 watts RMS, ~120 watts
peak.
High Frequency (HF) power:
40 watts RMS typical, ~120
watts peak. Frequency
response: 50hz – 20kHz +/-
1.5dB. Bass level -3dB @
39hz typical,
Signal To Noise ratio: > 90
dB A-weighted, Analog In
to Analog Out,
Power Requirements:
Input voltage: 100v – 230v
ProLinear 820 DSP - State of the Art Sound at an
Affordable Price
The Alesis ProLinear 820 DSP continues the new standard in near-field
monitors that was set by the ProLinear 720 DSP. With the same Alesis’
custom DSP technology, we have designed a speaker with same sound
quality and accuracy but with extended bass and greater output. This
allows the speaker to be used as a mid-field monitor as well as near-field.
As with the 720 DSP, the internal processing allows user flexibility to
configure the speaker for almost any application via the front panel control
or the included graphical PC application software.
ProLinear 820 DSP Features
It Begins with the Drivers
Any great speaker design starts with the best drivers and the Alesis’
custom drivers are exceptional. The woofer has a cast frame with an 8”
Kevlar-Carbon cone and oversized magnet assembly. The Kevlar-Carbon
cone has outstanding stiffness to weight ratio to minimize distortion,
extend bass response and provide excellent transient response. The
magnet assembly provides high linearity and good efficiency. In the 820
DSP cabinet, the woofer is flat down to 39hz (-3db, anechoically) with
harmonic distortion typically below .4% above 50hz.
Comments to this Manuals