Alesis DEQ830 User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
1 Quick Start Guide
If you can’t wait to get started…
The Alesis DEQ830 is a unique product, but its basic hookup and
operation are similar to other equalizers in most respects. If you're
experienced with signal processors, this chapter is a “shorthand”
guide for those who want to start using the DEQ830 right away. If
you have questions about any of the features, don’t worry – all the
details will be covered in later chapters.
I
f you're new to signal
p
rocessing, start with the
more detailed instructions for
hookup and operation found
in the next chapter.
Step 1: Hook it up to a mixer
The DEQ830’s power will
turn on automatically once its
A
C cable is plugged in, so be
sure to press the [POWER]
switch to turn the unit off
while you’re connecting it to
y
our other equipment.
1. Plug the POWER jack on the back of the DEQ830 into a
grounded AC power source with the supplied power cable.
2. Using high-quality cables, plug the left and right main outputs
of a non-powered mixer into the Channel 1 and Channel 2
inputs on the back of the DEQ830. You may connect up to
eight separate audio sources in the same manner.
3. Connect another pair of cables to the Channel 1 and Channel
2 outputs of the DEQ830 and plug them into your
amplification system or a pair of powered monitors.
4. Press the [POWER] switch on the front of the DEQ830 to
power up the unit.
When connecting the
D
EQ830 to other equipment,
make sure all gear has been
turned off. Also, to protect
y
our speakers, be certain
y
our amplifier(s) are turned
all the way down before
turning your equipment back
on.
5. You may want to link some of the channels together—
Channels 1 and 2, for example. That way you’ll hear the
changes you make with Channel 1 affect both channels of
the stereo signal at once. To do so, select Channel 1 by
pressing its [CHANNEL SELECT] button. Then hold
down the [LINK] button and press Channel 2’s
[CHANNEL SELECT] button at the same time. After this,
any EQ changes you make to Channel 1 will be reflected in
Channel 2. You may link up to eight channels together using
this method.
15
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 69 70

Comments to this Manuals

No comments