Alesis M-EQ230 User Manual download pdf (Page 3)

SECTION 1

DESCRIPTION OF CONTROLS

FRONT PANEL

1/3 OCTAVE BAND FADER

Each 1/3rd octave band is controlled by a center detented fader

which provides a boost or cut of 12dB. There are 30 bands per

channel.

MASTER CHANNEL GAIN FADER

Each channel has a Master Gain Fader which controls the

system's input gain by ±12dB.

CHANNEL BYPASS SWITCH

Each channel's EQ can be individually bypassed by means of the

Channel Bypass Switch. The Master Gain Fader affects program

input level only when the channel is

not bypassed.

EQ IN LED

The EQ In LED lights when the EQ is in use. The LED will go out

when a channel is bypassed.

CLIP INDICATOR

The red CLIP INDICATOR LED indicates the onset of distortion

(+18 dB). This LED should never light during normal use.

SIGNAL PRESENT LED

The green SIGNAL PRESENT LED indicates that a signal is

currently being fed into the

M-EQ 230.

This LED lights at

approximately -20dB and should be frequently lit during normal

use.

POWER LED

The POWER button turns the unit on or off.

BACK PANEL

INPUT JACKS (Left & Right)

Accepts instrument to line level input signals for both left and right

channels. Both 1/4" and RCA phono jacks are provided.

OUTPUT JACKS (Left & Right)

Line level output of the

M-EQ 230

for both left and right channels.

Both 1/4" and RCA phono jacks are provided.

1 2 3 4 5 6 7 8 9 10 11

No comments

Alesis M-EQ230 User Manual Page 3